Patch Painting is a rather specialized task, but with the right equipment, tools and preparation is a fact that almost all can be achieved. The following steps are applicable:
(1) jobs Drywalling are better when the weather is warm enough and not too humid. Make sure the surface to be painted is clean, dry and free of oil and grease. Three layers of joint compound should be used chalk, so that the connection between the panels must be secured with paper orfiberglass mesh tape. It gives the town a few paved. Fill any cracks or marks in the same way.
(2) throws the dust from the walls and ceilings before ignition can produce a clean finished yet from experience, I recommend a light sanding with fine sandpaper quality (grain 200), after the primary level is dried. Any deficiencies, increased fiber and chips first get resolved easily. Wear goggles and a mask, a good idea when drywalling as chalk dust can be really annoyingand some people who are known to cause problems with breathing and eye infections, always dressed in sensible clothing.
(3) Before painting over the vacuum cleaner or dust by hand and electric fields to ensure the elimination of dust door or window trim. As with any paint, drop cloths should be used to protect finished flooring, doors, windows, taps and other equipment, 1 mil plastic or a "painter of plastic is highly recommended.
(4) Noplaster sit for too long after it was recorded on tape and scoured the sunlight can cause paper to yellow and fade uneven plaster in search of paint. Use a good quality latex paint stain killing primer in fighting yellow.
(5) Three painting techniques that are commonly used to apply with a brush, roller or spray. A brush is good to cut, cut, and some fiddly areas like corners. Role is ideal for large areas, the larger area to be painted, the mostroller should be used. Roll the top layer in the direction of primers used, favors the uniformity of a good result. Using a syringe is a faster technique has not reached the end does not always see when a uniform and consistent to use a paint roller. A better idea is to use a spray paint of a second person the roles of the final result. Make fast work!
(6) Two coats of paint will suffice. A trick when it comes to grooming plaster to paint the first layerwith a low-gloss, flat latex wall paint, tinted with the color on the upper level. Problem using the standard "primer" or "robjagters or even a good quality primer-sealer" is not always sufficient to cover the seams glued and zip. They often end up with a little 'of see-through effect, which is not nice to see. It is never a wise idea to skip the first level, while preparing the surface to the upper layer must be used.
(7) For the top layer, two coatings of a gloss (includesEggshell and satin) used for the walls, leaving a final, so it is easy to clean and not exposed to stains and marks. Bathrooms and kitchens, cleaning the tongue is ideal for those rooms. A flat paint is a better solution for the ceiling. A photograph (transparent) effect will be avoided; common with glossy paint.
Take time to make your plaster, to prepare for the use of good quality paint products and tools, and you end up with an equal, impressive appearance late last year.Consultation with a specialist paint to the hardware store, before the work will remove any doubt about which products are the best way to use. I remember that some jobs may require adjustments to the procedure to make the results better painting.
0